Elaskon K 60 ML is a temporary corrosion protection agent for metal surfaces (small metal parts) as well as for the car cavity protection. Properties: Elaskon K 60 ML contains a solvent. After evaporation of the solvent a thin, touch-proof film is formed on the surfaces. For better application low-viscose. After correct application the surfaces are reliably protected against corrosion. Processing: Elaskon K 60 ML is applicable at normal temperature on cleaned metal surface by spraying, brushing, rolling, etc. The optimal application temperature is 25-35°C, for cavity conservation 40-50°C. The film is ready after evaporation of the solvent, depending on climate conditions after 2-8 hours. The temperature of the surface must be at least 3°C above dew point. Benefits: Strong adhesion on metal surfaces, optimal corrosion prevention. Storage: Storage in the closed original container, below 30°C. If stored below +10°C, heat and homogenise before use.